Home page

TLS-802 Bearing Repair Glue for Bridge

TLS- 802 bearing repair glue for bridge is a special glue for bridge support, and can also be used for the installation of other supports, such as steel frame support, and industrial plant steel roof support. The main function is to ensure that the surface of the support cushion stone is flat and has a certain roughness, so that the top surface elevation of the support cushion stone is accurate and consistent, ensuring the tight joint of the support bottom plate and the cushion stone, eliminating local voiding and avoiding eccentric compression and uneven force.

400 660 2636

TLX@njtelesun.com

Category

Structural adhesive

Product Inquiry Related products

Product Details

Product Features

▲ High initial adhesion, good thixotropic performance, no drooling

▲ Fast curing speed at normal temperature, shortening construction period

▲ Good toughness and impact resistance

▲ Curing does not shrink, anti- aging, acid and alkali resistance

Main Performance Parameters

Ratio of gel composition for groups A and B: A:B = 3:1

Performance Item	Indicator parameters	Test conditions
Colloidal compressive strength (MPa)	≥ 65	After pouring, cure for 7 days; upon reaching the specified age, immediately place at (23±2)°C. Tested under (50±5)% RH conditions
Colloidal tensile strength (MPa)	≥ 20
Colloidal flexural strength (MPa)	≥ 30 and does not exhibit brittle (catastrophic) failure
Direct tensile bond strength with concrete (MPa)	≥ max{2.5, ftk}, and corresponds to concrete cohesion failure.

Process and Construction Points of Special Leveling Glue for Bridge Support

Package Specifications

Name	Specifications	Component	Transportation	Storage
TLS - 802 Special leveling adhesive for bridge bearings	10 kg	A: 7.5 kg	This product is non-toxic and non-hazardous, and is classified as… General chemical building material transportation	Store the product under low-temperature drying conditions (25°C). One-year term
		B: 2.5 kg
	30 kg	A: 22.5 kg
		B: 7.5 kg