Home page

TLS-402E High Elastic Mold Sticking Steel Glue

TLS-402E High Elastic Mold Sticking Steel Glue

TLS-402E grouting steel sticking glue is a special type of glue suitable for fixing and then grouting steel. In the formulation design, the excellent bonding performance and the convenient process performance of the pouring construction are creatively integrated. After curing at room temperature, the adhesive layer has excellent adhesion properties and physical and mechanical properties to the steel sheet and the substrate. Even if the substrate is slightly damp, it can be applied and cured as usual, completely replacing imported products. This product is mainly used for concrete structure wet-outer steel plate reinforcement, external large-area steel plate infusion and reinforcement of bridges and other components, concrete crack grouting repair, equipment ground bolt secondary grouting, epoxy resin self-flow floor construction. TLS-402E incorporates nanoscale fillers with good thixotropy and high modulus of elasticity for engineering where special requirements are placed on the modulus of elasticity.

400 660 2636

TLX@njtelesun.com

Category

Structural adhesive

Product Inquiry Related products

Product Details

Product Features and Application Advantages

▲ Curing at room temperature, high strength, especially the shear strength of steel-steel and high- bond strength of steel

▲ Moderate viscosity for easy construction

▲ Anti- aging and acid and alkali resistance, water resistance

▲ Good toughness and impact resistance

▲ Small shrinkage during hardening

Main Performance Parameters

The ratio of allocating the glue of Component A and Component B: A: B = 4:1

Performance item		Parameter	Check condition
Performance item		TLS-402E	Check condition
Colloidal performance	Tensile strength（MPa）	≥ 35	Curing 7d, tested at 2mm/min loading speed at (23±2) ° C, (50±5)% RH
	Tensile modulus（MPa）	≥ 4.0×10³
	Elongation（%）	≥ 1.2
	Bending strength（MPa）	≥ 50 No brittle (fragmented) damage
	Compressive strength（MPa）	≥ 65
Bonding capability	Steel-steel tensile shear strength standard value（MPa）	≥ 15	Curing 7days, tested under (23±2)℃, (50±5)%RH
	Steel- steel T impact peeling length（mm）	≤ 25
	Steel-to-steel bond tensile strength（MPa）	≥ 33
	Positive tensile bond strength with C45（MPa）	≥ max{2.5, ftk}, Cohesive failure of concrete
	Non-volatile content (solid content)（%）	≥ 99	(105±2)℃ (180±5)min

Wet-Type Steel Plate Reinforcement Process and Construction Points

Package Specifications

Name	Specification	Component	Transportation	Storage
TLS-402E High Elastic Mold Sticking Steel Glue	5 kg	A: 4 kg	This product is non-toxic, non-dangerous, so it can be transported according to general chemical building materials.	The product is stored at a low temperature and dry climate (25 ℃ ). The storage period of one year
		B: 1 kg