Home page

TLS-CD Pre Embedded Channel

Curtain wall structure, pipeline ventilation support system, pre installed concrete structural components, underground pipe gallery power, gas, water supply and accessory installation, tunnel contact network, cantilever support, evacuation platform, power, ventilation, lighting, signal lights and accessory installation.

400 660 2636

TLX@njtelesun.com

Category

Curtain wall and utility network materials

Product Inquiry Related products

Product Details

Grade And Material

Q235B、Q345B、 Stainless steel or other materials can be customized according to demand

Surface Anti-Corrosion

The average thickness of multi-element alloy co infiltration is ≥ 80μm

The average thickness of hot-dip galvanizing is ≥ 80μm

Product Application Scope

▲ Curtain wall structure, pipeline ventilation support system, pre installed concrete structural components, underground pipe gallery power, gas, water supply and accessory installation, tunnel contact network, cantilever support, evacuation platform, power, ventilation, lighting, signal lights and accessory installation.

Application Features

▲ Install without noise or dust

▲ Do not damage the original structural components

▲ The position of the fixed component can be adjusted throughT-bolts

▲ Pre embedding into concrete components in advance can save costs and time for later installation

▲ Both ends and the mold cavity are filled with environmentally friendly materials to ensure that there will be no leakage of grout during the later pouring of components

▲ Outstanding bearing capacity, fatigue performance, and fire resistance performance

▲ The pre embedded channel is formed by one-time hot rolling of a steel section, with no residual stress during processing

Product Classification

Flat Tooth Groove

A plane has teeth

Note: b — Trench width / mm; h — Trench height / mm; b1 — Trench groove width / mm; d — Trench wall thickness

Dovetail Groove

B tailcoat with teeth

Note: b — Trench width / mm; h — Trench height / mm; b1 — Trench groove width / mm; d — Trench wall thickness

List of Embedded Channel Series Models

series	model	Channel steel foot surface	size / mm
series	model	Channel steel foot surface	b	h	d	b1
30	30×20	Flat teeth /Swallowtail teeth	30±1	20±1	3±0.4	14±1
30	30×26	Flat teeth /Swallowtail teeth	30±1	26±1	3±0.4	14±1
40	38×23	Flat teeth /Swallowtail teeth	38±1	23±1	3±0.4	18±1
	38×23		38±1	23±1	3.5±0.4	18±1
	40×22		40±1	22±1	3±0.4	19±1
	40×22		40±1	22±1	3.5±0.4	19±1
50	50×26	Flat teeth /Swallowtail teeth	50±1	26±1	4±0.4	21±1
	50×26		50±1	26±1	4.5±0.4	21±1
	52×34		52±1	34±1	4±0.4	22±1
	52×34		52±1	34±1	4.5±0.4	22±1
	53×34		53±1	34±1	4±0.4	22±1
	53×34		53±1	34±1	4.5±0.4	22±1

G-shaped anchor rod

Notes:b - Shaped Anchor Rod Leg Thickness / mm; h - Shaped Anchor Rod Height / mm;I - Shaped Anchor Rod Length / mm;d - Shaped Anchor Rod Waist Thickness / mm

Shaped Anchor Rod Size and Compatible Pre Embedded Channel Table

Model	Size mm				Anchor Rod Spacing / mm	The Distance Between The Center Of The Anchor Rod And The Edge Of The Groove End Face / mm
Model	I	h	d	b	Anchor Rod Spacing / mm
30 Series	14 to 22	≥ 80	6±1	18±1.5	≤ 250	≥ 25 / ≤ 50
40 Series	20 to 28	≥ 100	6±1	18±1.5	≤ 250	≥ 25 / ≤ 50
50 Series	30 to 40	≥ 120	6±1	25±2	≤ 250	≥ 25 / ≤ 50

Y-Shaped Anchor Rod

Notes:D - Cylindrical Anchor Rod Diameter / mm;h - Cylindrical Anchor Rod Anchoring End Cover Height / mm ;I - Cylindrical Anchor Rod Height / mm;D1 - Cylindrical Anchor Rod Outer End Diameter / mm

Table of Dimensions and Adaptation of Pre embedded Channels for Cylindrical Anchor Rod

Model	Size mm				Anchor Rod Spacing / mm	The Distance Between The Center Of The Anchor Rod And The Edge Of The Groove End Face / mm
Model	I	h	d	b	Anchor Rod Spacing / mm
30 Series	φ8 ~ φ10	60 to 80	φ14 ~ φ18	1.5 to 2.5	≤ 250	≥ 25/ ≤ 50
40 Series	φ10 ~ φ12	70 to 100	φ20 ~ φ26	1.5 to 2.5	≤ 250	≥ 25/ ≤ 50
50 Series	φ12 ~ φ14	100 to 120	φ24 ~ φ28	2.0 to 3.0	≤ 250	≥ 25/ ≤ 50