Home page

TLS-303 Economic Barrel Rubber Glue

TLS-303 is based on unsaturated resin and is suitable for the implantation of steel bars with non- load-bearing structures or steel bars that require fast curing.

400 660 2636

TLX@njtelesun.com

Category

Structural adhesive

Product Inquiry Related products

Product Details

TLS-303 is based on unsaturated resin and is suitable for the implantation of steel bars with non- load-bearing structures or steel bars that require fast curing.

▲ Solidified at room temperature, high strength, strong adhesion and good durability.

▲ According to different use environments, different use requirements to design different formulations.

▲ Anti- aging and acid and alkali resistance, excellent resistance to water and other media.

▲ Component A and Component B have a wide distribution of glue, which is convenient for on- site operation.

▲ As expected, the rear reinforcement has superior load-displacement characteristics.

▲ Good temperature resistance, which can be welded after burying, the glue is environmentally friendly, safe and non- toxic.

Main Performance Parameters

Performance item Performance ltem			lndex parameters lndex parameter	Check condition
Colloidal performance Glue performance	Splitting tensile strength (MPa)		≥ 8.5	Curing 7d, tested at 2mm/min loading speed at (23±2) ° C, (50±5)% RH loading speed at (23±2) ° C, (50±5)% RH
	Bending strength (MPa)		≥ 50
	Compressive strength (MPa)		≥ 60
Bonding capability	Steel-steel tensile shear strength standard value (MPa)		≥ 16	Curing 7days, tested under (23±2)℃, (50±5)%RH
	Ribbed steel bars under constrained drawing conditions (MPa)	C30 Φ25(HRB335) L=150 mm	≥ 11.0
		C60 Φ25(HRB335) L=125 mm	≥ 17.0
Nnvolatile content (solid content)%		≥ 99		(105±2)℃,(180±5)min

The Chemical Response Time is Shown in the Following Table

Component dispensing glue ratio: A:B=100:3~5 ;

Operable time and curing time (see table below)

Temperature of base materials	Operable Time (min)	Curing time (h)
0	≥ 30	180
10	≥ 20	90
20	≥ 15	45
30	≥ 10	25
40	≥ 5	15

The curing time refers to the time required for the colloid to reach 85% of the standard value of the strength. After the curing time is reached, the next step can be carried out.

Construction Steps

Package Specifications

Name	Specification	Component	Transportation	Storage
TLS - 303 Economy-Grade Barrel-Mounted Rebar Anchoring Adhesive	16 kg	4 kg X 4	This product is non-toxic and non-hazardous. According to general chemical building material transportation regulations.	Product stored under low-temperature drying conditions (25°C) Shelf life: one year
	20 kg	5 kg X 4
	15 kg	15 kg X 1